weighing systems weighing
concrete weighing batching systems automatic batching setpoint concrete batch controllers concrete weighing systems
 
BE4 Beltweigher
(PDF File)
BE4 beltweigher PDF

The BE 4 Beltweigher is designed to weigh product delivered on a continuous belt using a load cell. It can work with or without a belt speed tacho.

The unit connects to an interface board with a (110V/240VAC supply) Optional remote display and printer.

The Beltweigher works in metric units and provides the following information on its display at the press of a single key:

  • Tonnes per hour
  • Belt speed in metres per minute
  • Total tonnes(ongoing tonnes counter with power failure storage)
  • Trip tonnes (tonnes since trip reset with power failure storage)

In addition to displaying information, the Beltweigher has the following outputs:

  • Tonnes per hour analogue signal
    • (12 bits 0-10V and 4-20mA)
  • Serial RS232 or RS422 tonnes per hour and total tonnes
  • Variable rate impulse counter
  • Tonnes impulse counter
  • Set point (trip tonnes or tonnes per hour)
  • Remote display (optional)
  • Panel mount printer (optional)

In addition to these features, facilities are provided to set up the Beltweigher for a particular installation. These include:

 

  • Static tare and weight calibration
  • Belt calibration
  • Dynamic, or belt tare
  • Correction factor
  • Entering a Set point
    		•
    Beltweigher Interface BoardBeltweigher interface board
    		 
    weighing systems